< LED Flex Strips |
FilmGrade™ WHITE LED Strip Lights
3001.56 - In Stock
Regular price
$109.00
Sale
- Available in both tungsten (3200K) or daylight (5600K or 6500K)
- 95+ CRI and R9 > 80 (R9 > 90 for tungsten)
- Color correct to within ± 1/32 green
- 450 lumens per foot (1500 lumens per meter)
- Sold in full reels of 16-ft spools (5 meters)
- Also available: 6-inch sample pack w/ power supply and all accessories needed (in 12V only)
- 12V or 24V DC constant voltage input (power supply sold separately)
- 3M VHB double-sided adhesive for easy and secure mounting
- Uses PLUG system: female DC jacks on both ends
- [Optional] Dimming requires LED strip dimmer
- 4 oz copper for reduced voltage drop
- Free ground shipping to USA addresses
- In stock
- See our delivery policy here
![]() |
FilmGrade LED strip lights are designed for cameras. Using a blend of full spectrum phosphors, our LEDs are specially tuned to achieve high CRI & color correct light output at 6500K (daylight) and 3200K (tungsten). Our 95 CRI and 95 TLCI ratings ensure that you can spend more time shooting and less time correcting.![]() |
Requires 12V or 24V DC input to operate. FilmGrade power supply (PN 3091/PN 3092) can operate a full reel (16 ft / 5 m) of this LED strip. Using a third-party power supply? No problem - just make sure your power supply has enough power capacity for the length of LED strip you plan on connecting. |
FilmGrade LED strips use the PLUG system, and have female DC connectors mounted on both ends of the strip. Simply plug the power supply into the LED strip receptacle and you will be up and running in a matter of seconds. No extra assembly or accessories needed. Need to hard-wire these strips? See our DC plug adapters under PN 7094 and PN 7095. |
Pre-applied 3M VHB double-sided tape on the back side allows for simple but reliable installation. Peel back the liner and apply to virtually any surface. |
These LED strips can be cut to length in 1 inch (12V) or 2 inch (24V) intervals using just a pair of scissors. Rejoin LED strip segments or connect them to individual power supplies using our solderless connectors. Use PN 3070 for connecting an LED strip segment to open wire, and PN 3071 to join LED strip segments together. |
FilmGrade LED strips are flicker free and fully dimmable down to 0%. For a manual flicker-free PWM dimmer, see PN 3081. For DMX dimming, see our flicker-free DMX decoder (PN 3082). |
Product Overview
Waveform Lighting's FilmGrade™ white LED strips are professional-grade lights designed for use on film, TV and broadcast sets as well as continuous output photography applications. They are fully color correct and are spectrally tuned to match the wavelengths necessary to capture full color on camera.
Premium LEDs are specified to ensure not only high CRI/TLCI, but color accuracy within ±25K and ±75K for tungsten and daylight, respectively. Each LED strip is also specified to be within ± 1/32 green color correction.
The back side of the LED strip includes pre-applied 3M VHB® double-sided tape, which provides a simple but extremely strong adhesive mounting method for all of your projects.
The LED strips are 16.4 feet (5.0 meters) in length, and are conveniently reeled for quick and easy application, and can be cut to length in one or two inch intervals (for 12V and 24V versions, respectively) with just a pair of scissors.
FilmGrade LED strips are an indispensable tool in a photographer, DP, gaffer or lighting designer's lighting arsenal.
Product Downloads
Waveform Lighting 100% Quality and Satisfaction Guarantee
If you're not 100% satisfied with the performance, color or quality of your product, we'll work with you to make it right.
Simply contact us within 30 calendar days after delivery and we'll send a replacement at no additional charge, or offer you a full refund.
- See our full returns & refunds policy here
- See our warranty policy here
I sliced these up and ran them in channels throughout our very low basement ceiling. It's overkill maybe for light quality but I work in film and I'm a light snob. I spend a lot of time woodworking in the basement so the higher quality pays off. Probably the best LED light quality in my house right now. Flesh and wood tones look nice.
I’m new to wiring my own lights and only needed a small length, so the starter kit was perfect for me needs. It was so easy to set up! I’m using it as a grow light, so I also found the product sheets very helpful for choosing the type of light. So far it’s work great and seems to be great quality.
Great quality control and performance. For the price I would think it possible to include some sort of test results of the strip, or of each LED.
LOVE 'EM! I use the LEDs as video lights so I appreciate that it doesn't flicker, no matter the intensity the LED is set at. Customer service was very helpful. Very easy to cut the LEDs to a specific length & assemble the sections. I feel the power supply is MUCH larger than I need to power 40" of LED & I wish there was an option for a smaller power supply. I use the LEDs as part of a camera/light kit I ship out, so this problem probably won't apply to a permanent installation but it's very easy for the LED strips come out of the connector that holds the pieces together. I soldered the pieces together, I hope that does the trick but I feel the connectors should hold the ends more firmly. I would've preferred bi-color LEDs but I thought asking a client to adjust 2 dimmers would have been odd. It would be nice if there was 1 dimmer with a color temp knob & a brightness knob.
I am buying another dimmer & diffusion channel.
We used these to light retail shelves and were very satisfied with them. The 3200k matches our ceiling lights and the CRI seems to be on point.
From finishing to color stability, excellent products. I couldn’t be happier. Thanks.
I installed these with the aluminum sleeves also sold on this website for front facing vanity lighting in my master bathroom. These are not the first time I’ve used waveform lighting so I was not surprised. Once again they put out a beautiful light spectrum which is very accurate. My wife uses them while applying makeup and trying on outfits to make sure the colors are actually what she is going for. Only thing better would be incandescents, but these use a fraction of the energy.
I purchased the following to test the CRI listed on the site. Their CRI that's listed is spot on. I plan on purchasing full strips of 3200K for stair rail lighting.
FilmGrade™ WHITE LED Strip Lights - Daylight (5600K) / 12V DC / 6 inch (Sample Kit)
FilmGrade™ WHITE LED Strip Lights - Tungsten (3200K) / 12V DC / 6 inch (Sample Kit)
Contact
![]() |
4400 NE 77th Ave Ste 275
Vancouver, WA 98662, USA |
Support Center→
Frequently Asked Questions→



Site Navigation
HomeLumen Estimation Calculator
Spectrum Simulator
Custom LED Spectrum
CRI Calculator
CCT Simulator
Learn About LED Strips
SimpleColor™ LED Strips
Flicker-Free LED
High CRI LED Lighting
High CRI LED Strips
Full Spectrum
ABSOLUTE SERIES™ 99 CRI
Learning Center
Blog
About Us
Get Support








© 2020 Waveform Lighting / Privacy Policy / Terms of Use