• Available in both tungsten (3200K) or daylight (5600K or 6500K)
• 95+ CRI and R9 > 80 (R9 > 90 for tungsten)
• Color correct to within ± ¹/₃₂ green
• 450 lumens per foot (1500 lumens per meter)
• Sold in full reels of 16-ft spools (5 meters)
• 12V or 24V DC constant voltage input (power supply sold separately)
• 3M VHB double-sided adhesive for easy and secure mounting
• Uses PLUG system: female DC jacks on both ends
• [Optional] Dimming requires LED strip dimmer
• 4 oz copper for reduced voltage drop
• Free ground shipping to USA addresses
• In stock
• See our delivery policy here

FilmGrade LED strip lights are designed for cameras. Using a blend of full spectrum phosphors, our LEDs are specially tuned to achieve high CRI & color correct light output at 6500K (daylight) and 3200K (tungsten). Our 95 CRI and 95 TLCI ratings ensure that you can spend more time shooting and less time correcting.

Requires 12V or 24V DC input to operate. FilmGrade power supply (PN 3091/PN 3092) can operate a full reel (16 ft / 5 m) of this LED strip. Using a third-party power supply? No problem - just make sure your power supply has enough power capacity for the length of LED strip you plan on connecting.

FilmGrade LED strips use the PLUG system, and have female DC connectors mounted on both ends of the strip. Simply plug the power supply into the LED strip receptacle and you will be up and running in a matter of seconds. No extra assembly or accessories needed. Need to hard-wire these strips? See our DC plug adapters under PN 7094 and PN 7095.

Pre-applied 3M VHB double-sided tape on the back side allows for simple but reliable installation. Peel back the liner and apply to virtually any surface.

These LED strips can be cut to length in 1 inch (12V) or 2 inch (24V) intervals using just a pair of scissors. Rejoin LED strip segments or connect them to individual power supplies using our solderless connectors. Use PN 3070 for connecting an LED strip segment to open wire, and PN 3071 to join LED strip segments together.

FilmGrade LED strips are flicker free and fully dimmable down to 0%. For a manual flicker-free PWM dimmer, see PN 3081. For DMX dimming, see our flicker-free DMX decoder (PN 3082).

Product Overview

Waveform Lighting's FilmGrade™ white LED strips are professional-grade lights designed for use on film, TV and broadcast sets as well as continuous output photography applications. They are fully color correct and are spectrally tuned to match the wavelengths necessary to capture full color on camera.

Premium LEDs are specified to ensure not only high CRI/TLCI, but color accuracy within ±25K and ±75K for tungsten and daylight, respectively. Each LED strip is also specified to be within ± ¹/₃₂ green color correction.

The back side of the LED strip includes pre-applied 3M VHB® double-sided tape, which provides a simple but extremely strong adhesive mounting method for all of your projects.

The LED strips are 16.4 feet (5.0 meters) in length, and are conveniently reeled for quick and easy application, and can be cut to length in one or two inch intervals (for 12V and 24V versions, respectively) with just a pair of scissors.

FilmGrade LED strips are an indispensable tool in a photographer, DP, gaffer or lighting designer's lighting arsenal.

Product Downloads

  12V Specification Sheet 

  24V Specification Sheet 

   3200K Photometric Report

   5600K Photometric Report

   6500K Photometric Report

Waveform Lighting 100% Quality and Satisfaction Guarantee

If you're not 100% satisfied with the performance, color or quality of your product, we'll work with you to make it right.

Simply contact us within 30 calendar days after delivery and we'll send a replacement at no additional charge, or offer you a full refund.

• See our full returns & refunds policy here
• See our warranty policy here