SimpleColor™ LED strips use the PLUG system, and have female DC connectors mounted on both ends of the strip. Simply plug the power supply into the LED strip receptacle and you will be up and running in a matter of seconds. No extra assembly or accessories needed.
Need to hard-wire these strips? See our DC plug adapters under PN 7094 and PN 7095.
Pre-applied 3M VHB double-sided tape on the back side allows for simple but reliable installation. Peel back the liner and apply to virtually any surface.
These LED strips can be cut to length in 1 inch intervals using just a pair of scissors.
Rejoin LED strip segments or connect them to individual power supplies using our solderless connectors. Use PN 3070 for connecting an LED strip segment to open wire, and PN 3071 to join LED strip segments together.
SimpleColor LED strips are fully dimmable down to 0%. For an in-line PWM dimmer, see PN 3081. Wall-dimmer setups (e.g. Lutron/Leviton) will require a dimmable power supply (PN 3093). More info on LED strip dimming here.