How to Connect DC Adapters to LED Strips

If you are using an LED strip that uses the WIRE system (e.g. PN 3001.27)and you are looking to connect it to a DC connector (e.g. PN 3091), follow the directions below on how to use a DC adapter (PN 7094) to assemble your components together.

How to wire up the power connectors

Step 1: Loosen both screws on the DC adapter using a screw driver

Step 2: Insert the ends of the red and black wires into the receptacle of the DC adapter. Be sure to plug it in with the polarity correct. (Red wire in the +, black wire in the -).

Step 3: Tighten the screws and ensure the wires are secure

Step 4: Plug your power supply into the plug receptacle.